電動扭矩扳手也被稱為扭矩扳手、扭矩扳手、扭矩扳手、扭矩的產品力和距離,當螺紋緊固件緊固螺栓和螺母扭矩大小等需要控制,確保螺紋緊固,而不是由于扭矩太大的破壞,所以使用扭力扳手操作。
Electric torque wrench is also known as torque wrench, torque wrench, torque wrench, product force and distance of torque. When the torque of fastening bolt and nut of threaded fastener needs to be controlled to ensure that the thread is tightened, rather than the damage caused by too much torque, the torque wrench is used for operation.
設置一個轉矩,轉矩達到設定值時,扳手“卡塔”噪音或扳手關節彎曲角度,這已經擰緊力矩。
First, set a maximum torque, when the torque reaches the set value, the wrench "chatter" noise or wrench joint bending angle, which has been tightening torque.
廣泛應用在許多行業,如汽車修理、重型設備維護、產品裝配(通常稱為“脈沖工具”,專門為精確的轉矩輸出),主要建設項目,鋼絲的安裝螺釘和其他地區的高轉矩輸出。
It is widely used in many industries, such as automobile repair, heavy equipment maintenance, product assembly (usually called "pulse tool", specially for precise torque output), main construction projects, installation screws of steel wire and high torque output in other areas.
氣動扳手,也稱為棘輪扳手和電動工具總是健康,主要是消費提供高扭矩輸出的工具。它通過持續供電使某個對象的質量旋轉得更快,然后瞬間到輸出軸,可以獲得更大的扭矩輸出。壓縮空氣是更常見的電源,但也有使用電動或液壓。
Pneumatic wrenches, also known as ratchet wrenches and electric tools are always healthy, mainly for the lowest consumption of tools that provide high torque output. It makes the mass of an object rotate faster through continuous power supply, and then instantaneously to the output shaft, it can obtain greater torque output. Compressed air is the most common source of power, but it is also used electrically or hydraulically.
氣動扳手一般不適用于緊固設備本體安裝的陶瓷,塑料緊固件。
Pneumatic wrench is generally not suitable for fastening ceramic and plastic fasteners installed on the equipment body.
