電動扳手是指擰緊和旋松螺栓及螺母的電動工具，是一種擰緊高強度螺栓的工具。用于鋼結構橋梁、廠房建筑、化工、發(fā)電設備安裝大六角頭高強度螺栓施工的初擰、終擰和扭剪型高強度螺栓的初擰，以及對螺栓緊固件的扭矩或軸向力有嚴格要求的場合。
Electric wrench refers to an electric tool for tightening and loosening bolts and nuts. It is a tool for tightening high-strength bolts. It is used for initial tightening, final tightening and initial tightening of torsional shear high-strength bolts in the construction of large hexagon head high-strength bolts for the installation of steel structure bridges, plant buildings, chemical industry and power generation equipment, as well as occasions with strict requirements on the torque or axial force of bolt fasteners.
電動扳手出口歐盟，需要出示產品CE認證證書報告，用以證明滿足歐盟ce認證要求。
When the electric wrench is exported to the EU, the product CE certification report shall be presented to prove that it meets the EU CE certification requirements.
電磁兼容部分：騷擾功率、輻射騷擾、端子騷擾電壓、靜電放電抗擾度、電磁輻射抗擾度、傳導抗擾。
Electromagnetic compatibility: disturbance power, radiation disturbance, terminal disturbance voltage, electrostatic discharge immunity, electromagnetic radiation immunity, conduction immunity.
低電壓部分：諧波電流、電壓波動和閃爍、電流強度、瞬時電壓
Low voltage part: harmonic current, voltage fluctuation and flicker, current intensity, instantaneous voltage
主要測試標準：
Main test standards:
EN 60745-1 手持式電動工具
EN 60745-1 hand held electric tools
EN 60745-2-9手持式電動工具.性.第2-9部分:攻絲機的詳細要求
EN 60745-2-9 hand held electric tools Safety Part 2-9: Particular requirements for tapping machines
EN 61000-3-2 電磁兼容性（ EMC ） ，
EN 61000-3-2 electromagnetic compatibility (EMC),
EN 61000-3-3電磁兼容性（EMC） 第3-3部分
EN 61000-3-3 electromagnetic compatibility (EMC) Part 3-3
EN 55014-1電磁兼容性.家用電器,電工具和類似裝置的要求.放射物
EN 55014-1 electromagnetic compatibility Requirements for household appliances, electrical tools and similar devices Radioactive substance
EN 55014-2電磁兼容性.家用電器,電工具和類似裝置的要求.
EN 55014-2 electromagnetic compatibility Requirements for household appliances, electrical tools and similar devices
辦理CE認證需要的資料：
Data required for CE certification:
1、公司信息：名稱、地址、商標、
1. Company information: name, address, trademark
2、產品信息：名稱、型號、技術參數(shù)表（如有多型號，需系列產品差異比較資料）；
2. Product information: name, model and technical parameter table (if there are multiple models, the difference comparison data of series products is required);
3、使用說明書；
3. Operating instructions;
The above is the special wrench for twisting and shearing bolts http://www.cnbeilibao.com I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service
